  New Stainless Steel Rod Holders 2" . flush mount, Soft black liner. Flange gasket with integral flip-up cap. Tube OD: 2=1/8". Tube ID: 1-7/8". Length under flange: 8". The width of the flange is 3.5 and the length of the flange is 4". The diameter of the mounting hole is 5/16". The distanaces from the center to center of the holes are: 2-1/4" and 3-1/4". The angle is 90 Degree. It comes with a plastic sleeve on the interior and an interior bottom pin to prevent spinning of rods E=90 degree |